Reel-To Reel Tape Speed Chart

Reel-To Reel Tape Speed Chart – Of course the faster the tape speed, the higher the fidelity/bandwidth, but you run out of tape faster. Equals 1 hour of play at 7.5 i/s but how do they get that value? The speed of the tape is determined by the tape speed switch, which is calculated in 'inches per second' (i.p.s.), usually you use 3¾ or 7½ ips. For simplicity, it assumes that the tape is single sided.

Below is a little applet to demo the speed difference. The end of the tape is manually pulled from the reel, threaded through mechanical guides and over a tape head assembly, and attached by fri… Ampex 341 / 541 / 641. This tape timing chart is approximate.

To prepare for use, the supply reel (or feed reel) containing the tape is placed on a spindle or hub. Also a minimum of 7.5 inches per second is required to physically cut or edit the tape. 19.05 the lowest professional speed, used on some single.

Most reels will contain a bit more tape than indicated time implies, typically about 6%. These timings are for one program. You can run at 2x speed, and 3x speed.

Most consumer machines will display best performance with this tape. The tape speed of these machines was slow at 1 7 8 ips (inches per second) in order to maximise the recording time possible on the small amount of tape. Hence they make things like helical scan for video because.

Mix different kind of reel (plastic and metallic) and/or different diameter (5 and 10.1/2 i.e.) can damage both tape and mechanical reel parts except in some professional recorder. It has the thinnest formula and provides 1.5. Press the > button to start the player.

BASF PES18 Triple Play reel to reel 1/4" audio tape 1080m Retro Style